RAM Trucks Pickup 2017 Slot Key
Fobik Key (PCF7961A) GQ4-53T
Overview
Key Type
Slot Key
Markets
USA, SA
Transponder
ID46 (PCF7961A / HITAG 2)
Integrated
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
No
Skill Level
Skilled
Original Keys
RAM Fobik GQ4-53T
Can Be Unlocked
RAM Fobik GQ4-53T w/ Engine Start
Can Be Unlocked
RAM Fobik GQ4-53T w/ Engine Start, Air Suspension
Can Be Unlocked
Overview
Add key
OBD
All keys lost
OBD
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Not specified
Power supply
Recommended (if under 11.5V)
Additional cables required
Yes
Number of key slots
8
Key Programming via OBD
General Instructions
- If car has keyless go system, make sure to select special key programming function.
- For some models, programming keys and reading PIN code have to install special cable adapter.
- After 3 incorrect PIN attempts the immobilizer locks; fix by turning ignition OFF, switching hazard lights ON, and programming keys with the correct PIN.
Gateway Bypass Location (Star-RFH)
Additional Cables and Adapters
Add Key
Chrysler, Dodge, Jeep Gateway Bypass Cable for RFH-Connection (TDB084/ADC2011)
Choose any open connector spot on the GREEN bank, if all spots are populated, pick any one and remove the connector that's in place temporarily and use it for programming, replace when completed.
Programmers
Autel
Immobilizer Programming
Abrites AVDI
Immobilizer Programming
Xhorse
Immobilizer Programming
TDB1000
Immobilizer Programming
Smart Pro
Immobilizer Programming
Lonsdor K518 PRO
Immobilizer Programming
Code Series
L1-L3580 (Chrysler, Dodge, Eagle, Jeep, Plymouth) M1-M2618 (Chrysler, Dodge, Eagle, Jeep, Maserati, Mitsubishi, Plymouth, RAM, Sterling, Volkswagen)
Media
Emergency Key
Emergency blade cutting tutorial
Using XHORSE Condor XC-MINI PLUS II automatic machine
Overview
Double locked
No
Opening direction (LHD)
Not specified
Decoder capability
Door LockBoot/Trunk
Decoding Tips
- All wafers are stamped with actual depth numbers.
- Position 1 is not used in the door lock.
- To decode the lock, read in the SAME direction as it was picked.
- Lishi 2-in-1 is s designed for code series M1-M2168 and VN0-VN1999 as it has 4 depths.
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Keys has an integrated immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
Circuitboard
GQ4-53T PFC7961A PCB
