Bentley Continental GT 2012 Smart Key
Smart Key (ID46)
Overview
Key Type
Smart Key
Markets
All
Transponder
ID46 (PCF7946A / HITAG 2)
Integrated
Frequency
315 MHz433 MHz
Battery
CR2032
Transponder Cloning
Yes The transponder chip can be copied, but the remote control will not work
Skill Level
Skilled
Universal Keys
315MHz: Xhorse ID 0564 634
Test passed
315MHz: KeyDiy ID R01588
Not tested
315MHz with Kessy: Xhorse ID 0537 235
Test passed
434MHz: Xhorse ID 0518 545
Test passed
Original Keys
Genuine Part Number (433MHz): 4E0837220H
Genuine Part Number with Kessy (433MHz): 4E0837220M, 4E0837220D
Genuine Part Number (315MHz): 4E0837220J. 4E0837220K, 4E0837220L, 4E0837220B
Genuine Part Number with Kessy (315MHz): 4E0837220N, 4E0837220P, 4E0837220Q
Overview
Add key
OBD
All keys lost
OBDEeprom/Bench
System
IMMO 4 (Kessy)
Prepare dealer key
Yes
Remote programming
Automatic
All keys erased automatically
Yes
Power supply
Mandatory
Additional cables required
No
Number of key slots
8
Key Programming via OBD
General Instructions
- The PIN and CS codes are required for key programming.
- For some models it is possible to read immo data from engine ECU.
- If programmer fail to read the data via OBD - perform Eeprom/Bench method.
Key Programming via EEPROM
Unit - KESSY
2 versions: Encrypted (2008+ Continental/Siemens VDO) and Unencrypted (-2008 Siemens VDO/Siemens VDO)
Unencrypted - Read eeprom 93C86
Encrypted - Reading with in-circuit connection (refer to Kessy 2008+ of your programmer)
KESSY Location
Located in the driver's footwell
Eeprom reading
Recommended out-circuit reading.Use EEPROM adapters, most programmers can handle the readout.
KESSY (-2008)
Read eeprom 93C86
KESSY (2008+)
Reading with in-circuit connection (refer to Kessy 2008+ of your programmer)
Programmers
Autel
Recommended
Immobilizer Programming
EEPROM/Bench Programming
Xhorse
Recommended
Immobilizer Programming
EEPROM/Bench Programming
Abrites AVDI
Recommended
Immobilizer Programming
TDB1000
Not supported
Code Series
0001-6000 EXT (Audi A8, VW Touareg) 8-8 cuts 0001-6000, 00001-06000 (VW Touareg) 8-8 cuts 6001-8110 (VW Touareg) 8-8 cuts 6001-8110 EXT (VW Touareg) 8-8 cuts
Media
Cutting blade tutorial
Using Xhorse automatic machine
Overview
Double locked
Yes
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door Lock
Decoding Tips
- HU66 generations two and three locks wafers are 2 up 2 down
- The lock has 8 spaces and 4 depths.
- Audi A8 and some VW Touareg use a 9-cut lock, the 9th cut is a generic cut the same in every lock. All cut to code machines have the facility to cut this 9th cut automatically if selected.
- The same eight cuts on both sides of the key.
- To decode the lock read in the SAME direction as it was picked.
- Picking rule: if the wafer moves at all leave it alone.
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Key has an integrated immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
- Key shell is secured with three screws.
Media
