Bentley Azure 2006 Remote Key
Bentley Remote Key
Overview
Key Type
Remote Key
Markets
All
Transponder
ID44 (PCF7935DS - Crypto)
Separate
Frequency
315 MHz433 MHz
Skill Level
Expert
Original Keys
OEM Key
Direct Programming to another vehicle
Overview
Add key
OBD
All keys lost
OBDEeprom/Bench
System
CM Immo (VW) + CM Remote module (Bentley)
Prepare dealer key
No
Remote programming
OBD
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Key Programming via OBD
General Instructions
- Pincode is needed for OBD programming (can be extracted from the immobox)
- The immobilizer chip and the remote control are programmed separately.
- The remote control can only be programmed using official Bentley factory equipment (Omitec Key Programmer)
Key Programming via EEPROM
Immobox - CM IMMO
Original transponder: PCF7935 ID44
Allowed transponder: PCF7935
Data location: 24C04
Chip type: SOP8
No. of keys: 6
Tip: Write key via dump to an existing spot, then no need write eeprom back.
CM Immobilizer box
Located above the pedals, behind the ignition switch (remove the panel above the pedals to gain access)
Data location
Eeprom 24C04
Programmers
Rolls‑Royce Bentley Omitec
Recommended
Immobilizer Programming
Remote Programming
Smart Pro
Immobilizer Programming
Abrites AVDI
EEPROM/Bench Programming
Xhorse
EEPROM/Bench Programming
Autel
EEPROM/Bench Programming
TDB1000
Not supported
Overview
Double locked
No
Opening direction (LHD)
Not specified
Decoder capability
Not specified
Overview
Original key glued
No
Synchronizing
No