Dodge Challenger 2010 Smart Key
FCA Smart Key (PCF7953M) M3N40821302
Overview
Key Type
Smart Key
Markets
EU, USA, SA, MEA, ASIA
Transponder
ID4A (PCF7953M / Hitag AES)
Integrated
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
No
Skill Level
Specialist
Universal Keys
Xhorse: ID 0501 398
Test passed
Original Keys
Jeep Part Numbers: 68250337, 68250337AB, 68417821, 68417821AA (3+1 Buttons)
OEM Part Numbers: 68155686, 68155686AB, 68155686AA, 68394190, 68394190AA, 68394196, 68394196AA (3+1 Buttons)
OEM Part Numbers: 68155687, 68155687AB, 68394191, 68394191AA, 68394195AA, 68394195 AA (4+1 Buttons)
Overview
Add key
OBD
All keys lost
OBD
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
Yes
Key Programming via OBD
General Instructions
- The emergency key spot is the start/stop button.
- Usually gateway connection needed with 2018+ models.
- Remotes won’t work until the tester is unplugged from OBD socket
Chrysler 300 RFH-Connection (2018+) in Trunk
Emergency Key Spot
Start-stop button
Additional Cables and Adapters
Add Key
Chrysler, Dodge, Jeep Gateway Bypass Cable for RFH-Connection (TDB084/ADC2011)
Choose any open connector spot on the GREEN bank, if all spots are populated, pick any one and remove the connector that's in place temporarily and use it for programming, replace when completed.
Programmers
Abrites AVDI
Recommended
Immobilizer Programming
Autel
Recommended
Immobilizer Programming
TDB1000
Recommended
Immobilizer Programming
Smart Pro
Immobilizer Programming
Xhorse
Immobilizer Programming
Lonsdor K518 PRO
Immobilizer Programming
Code Series
L1-L3580 (Chrysler, Dodge, Eagle, Jeep, Plymouth) M1-M2618 (Chrysler, Dodge, Eagle, Jeep, Maserati, Mitsubishi, Plymouth, RAM, Sterling, Volkswagen)
Media
Emergency Key
Emergency blade cutting tutorial
Using XHORSE Condor XC-MINI PLUS II automatic machine
Overview
Double locked
No
Opening direction (LHD)
Clockwise
Decoder capability
Door LockBoot/Trunk
Decoding Tips
- All wafers are stamped with actual depth numbers.
- Position 1 is not used in the door lock.
- To decode the lock, read in the SAME direction as it was picked.
- Lishi 2-in-1 is s designed for code series M1-M2168 and VN0-VN1999 as it has 4 depths.
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Key has an integrated immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
Media
Key Shell replacement
Circuitboard
Remote PCB M3N40821302
