DS DS 7 Crossback 2020 Smart Key
PSA Smart Key (PCF7953M)
Overview
Key Type
Smart Key
Markets
EU, SA, ASIA, MEA, AUO
Transponder
ID4A (PCF7953M / HITAG AES)
Integrated
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
No
Skill Level
Beginner
Universal Keys
Xhorse ID 0518 546
Test passed
Autel PCF7953M
Test passed
Overview
Add key
OBD
All keys lost
OBD
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Key Programming via OBD
General Instructions
- If the system is locked try to unlock the system by disconnecting the tester and turn ignition off for 15 minutes then ignition on for 5 minutes
- Pressing a remote when it is desynchronised can cause the BSI to enter antiscanning mode for 1 minute when synchronisation is not possible.
- The old keys not programmed as part of key programming procedure will never be able to be re-programmed (newest models).
- If the keyless functions don't work after programming, try setting the number of keys to one more than you're actually programming.
OBD Location
Behind the protective cover at knee height or in the middle console.
Emergency Key Spot
Middle console or left side of the steering column with corresponding key icon.
Programmers
Abrites AVDI
Recommended
Immobilizer Programming
Autel
Recommended
Immobilizer Programming
TDB1000
Recommended
Immobilizer Programming
Xhorse
Immobilizer Programming
Smart Pro
Immobilizer Programming
Lonsdor K518 PRO
Immobilizer Programming
Code Series
0001-2000 (7-7 cuts) 0001-2000 (7-7 cuts + Extra cut) HCA0001-HCA2000 (7-7 cuts) HCA0001-HCA2000 (7-7 cuts + Extra cut)
Media
Cutting blade tutorial
Using Xhorse automatic machine
Overview
Double locked
No
Opening direction (LHD)
Not specified
Decoder capability
Door LockBoot/Trunk
Decoding Tips
- HU83 lock wafers are 1 up 1 down
- Most locks has 7 spaces and 4 depths. When using Lishi tool with 8 spaces leave number 1 empty.
- The same cuts on both sides of the key.
- To decode the lock read in the SAME direction as it was picked.
- Picking rule: if the wafer moves at all leave it alone.
Overview
Original key glued
Not specified
Synchronizing
No
Repair Instructions
- All smart keys have an integrated immobilizer chip.
- Battery clips are quite easy to bend. Use caution when changing the battery.