Rover 75 2004 Remote Key
2 Button Remote key HU92R (EWS3)
Overview
Key Type
Remote Key
Markets
EU, AF, AUO, USA
Transponder
PCF7935 (ID44)
Integrated
Frequency
315 MHz433 MHz
Battery
VL2020, CR2025
Transponder Cloning
No
Skill Level
Beginner
Universal Keys
Xhorse 433Mhz: ID 0554 392 (Pincode)
Test passed
Xhorse 315Mhz: ID 0554 648 (Pincode)
Test passed
Keydiy 433Mhz: R01139 (Pincode)
Test passed
Keydiy 315Mhz: R01141 (Pincode)
Not tested
Overview
Add key
Eeprom/Bench
All keys lost
Eeprom/Bench
System
EWS3
Prepare dealer key
Yes
Remote programming
OBD
All keys erased automatically
No
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Number of key slots
10
Key Programming via OBD
General Instructions
- Keys cannot be programmed via OBD. Check the instructions for eeprom programming.
- The remote control is programmed via OBD.
- All keys lost or adding additional keys can be programmed only by removing EWS unit and reading eeprom.
Key Programming via EEPROM
Unit - EWS 3
Original transponder: PCF7930
Allowed transponder: PCF7930, PCF7935
Data location: MC68HC11EA9
- 0D46J - read with Autel/Xhorse adapter or any other programmer
- 2D47J - secured, AK90+ or Orange5 is recommended for reading, since security bit is active and trying to read without bypassing protection you will erase the data in the MCU.
Heating temperature: 350°C
No. of keys: 10
Unit location EWS3
Located in the driver's footwell on the left. In Rover and MG models, the EWS unit is inside a metal cover, so it takes more time to remove it.
EWS3
Transponder writing
Xhorse XT15 chip does not work often when written directly. Solution: generate XT15 to ID33 Volkswagen before writing key file. Original PCF7935DS - ok 100%
Programmers
AK90+
Recommended
EEPROM/Bench Programming
Autel
Recommended
Remote Programming
EEPROM/Bench Programming
Xhorse
Recommended
Remote Programming
EEPROM/Bench Programming
Abrites AVDI
Recommended
EEPROM/Bench Programming
Smart Pro
Remote Programming
Orange5
EEPROM/Bench Programming
Tango
Key via Dump
TDB1000
Not supported
Code Series
1-8100 (cuts: 8-8, Card: 1096, ISN: 5912) HA00000001-HA00008100 (cuts: 8-8, Card: 1096, ISN: 7506) HA00000010-HA00081009 (cuts: 8-8, Card: 1096, ISN: 7507)
Media
Cutting blade tutorial
Using Xhorse automatic machine
Overview
Double locked
Yes
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockIgnitionBoot/Trunk
Decoding Tips
- The lock has 8 spaces and 4 depths.
- The same eight cuts on both sides of the key.
- To decode the lock read in the SAME direction as it was picked.
Media
(611) HU92 Lishi & Condor Dolphin 2 Making a Mechanical Key to a Mini Cooper
Video by Bored Lock picker
Overview
Original key glued
Yes
Synchronizing
No