Saturn S-Series 1997 Remote
GM Remote AB01502T
Overview
Key Type
Remote
Markets
USA
Frequency
315 MHz
Battery
CR2032
Skill Level
Beginner
Universal Keys
Xhorse ID 0535 709
Test passed
KeyDiy ID R00215
Not tested
Original Keys
ABO1502T 2Buttons
Direct Programming to another vehicle
ABO1502T 3Buttons w/ Trunk release (rear)
Direct Programming to another vehicle
ABO1502T 4Buttons w/ Trunk release, Panic alarm
Direct Programming to another vehicle
Overview
Add key
Not specified
All keys lost
Not specified
Prepare dealer key
Not specified
Remote programming
Manual
All keys erased automatically
Yes
Power supply
Not specified
Additional cables required
No
Number of key slots
4
Remote Manual Programming
PROCEDURE
- CLOSE all doors.
- Insert key into ignition and leave in the OFF position.
- Locate the OBD port.
- Ensure there are contacts in terminals 4 and 8.
- Connect terminal 4 and 8 together with a suitable wire.
- The vehicle will LOCK and UNLOCK the doors to indicate programming mode has been selected.
- Switch ignition ON.
- The doors will LOCK.
- PRESS and HOLD the LOCK and UNLOCK buttons together for up to 30 seconds on the first remote transmitter.
- The vehicle will UNLOCK the doors.
- RELEASE the buttons.
- Within 1 minute repeat step 9 to 11 for any additional remote transmitters.
- REMOVE the OBD terminal wire.
- Check ALL remote transmitters for operation.
OBD port
Overview
Double locked
Not specified
Opening direction (LHD)
Not specified
Decoder capability
Not specified
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Separate remotes do not house immobilizer chips.
- There is no need to synchronize or reprogram the key after replacing the battery.
Media
Shell and battery change
Circuitboard
ABO1502T PCB
