Lamborghini Gallardo 2009 Remote Key
Remote Key
Overview
Key Type
Remote Key
Markets
EU, USA, AUO, ASIA
Transponder
ID48 (Megamos 48)
Separate
Frequency
315 MHz433 MHz
Battery
CR2032
Transponder Cloning
Yes
Skill Level
Expert
Original Keys
OEM 315MHz: 400 837 231 A
Direct Programming to another vehicle
OEM 433MHz: 400 837 231
Direct Programming to another vehicle
Overview
Add key
Eeprom/Bench
All keys lost
Eeprom/Bench
System
IMMO 4
Prepare dealer key
Yes
Remote programming
OBD
All keys erased automatically
Yes
Power supply
Mandatory
Additional cables required
No
Number of key slots
8
Key Programming via OBD
General Instructions
- Add key case: Clone the transponder and program remote via OBD port.
- AKL case: Use Odis online or aftermarket supported programmers.
- If "SAFE" message displayed on the instrument cluster means that the transponder is not programmed to the current vehicle.
Vehicle
Restyling model from 2008
Access handle
Open engine compartment handle located behind drivers seat
Key Programming via EEPROM
Unit - RB8 Dash
Data location: 24C64 crypto
Reading: in circuit, out circuit
Adapters: Autel APB-129_V1, APA-103; VVDI Eeprom Clip etc.
Heating temperature: 300-350°C
Unit location
Instrument cluster
Instrument cluster
Eeprom is located on the other side (front) of the PCB.
Programmers
ODIS Online
Recommended
Immobilizer Programming
Smok UHDS
Recommended
EEPROM/Bench Programming
Xhorse
Remote Programming
Cloning
Autel
Remote Programming
Abrites AVDI
Remote Programming
Lonsdor K518 PRO
Remote Programming
Obdstar G3 (X300)
Remote Programming
Xtool x100 Pad3
Remote Programming
LARA (Lamborghini OEM)
Not supported
VCDS
Not supported
Smart Pro
Not supported
TDB1000
Not supported
Code Series
00001-06000 (8-8 cuts) 0001-6000 (8-8 cuts) 6001-8110 (8-8 cuts) 6001-8110 EXT (8-8 cuts + Extra cut)
Media
Cutting blade tutorial
Using Xhorse automatic machine
Overview
Double locked
Yes
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockIgnition
Decoding Tips
- HU66 generations two and three locks wafers are 2 up 2 down
- The lock has 8 spaces and 4 depths.
- The same eight cuts on both sides of the key.
- To decode the lock read in the SAME direction as it was picked.
- Picking rule: if the wafer moves at all leave it alone.
- Many Audi and Seat locks from 2002 use a 9-cut lock, the 9th cut is a generic "Extra" cut the same in every lock. All cut to code machines have the facility to cut this 9th cut automatically if selected.
Overview
Original key glued
Yes
Synchronizing
No