Saab 9-5 2002 Slot Key

Saab Slot Key

EU, USA

Overview

Key Type
Slot Key without keyless functions
Markets
EU, USA
Transponder
ID46 (PCF7946A / HITAG 2)
Integrated
Frequency
433 MHz
Battery
CR2025, CR2032
Transponder Cloning
Yes You can copy the immobilizer chip, but the remote control will not work
Skill Level
Specialist

Original Keys

Genuine Part Number: 12783781

Genuine Part Number: 12783781

Overview

Add key
OBD
All keys lost
Eeprom/Bench
System
CIM
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Number of key slots
5

Key Programming via OBD

General Instructions

  • Most devices require a PIN-code.
  • All keys must be present during programming.
Key Programming with Autel
Key Programming with Autel

Key Programming via EEPROM

Unit - Saab CIM

Recommended tools: VVDI2 + VVDI Prog; VVDI Tool PLus; Autel IM;

Unit location: Behind steering wheel

Data location: Microchip 93LC66A (512x8)

Reading: Out circuit recommended

Adapters: Autel APB-129_V1, APA-103; VVDI Eeprom Clip etc.

Heating temperature: 300°C

Data size: 512 bytes

Chip type: SOP8

No. of keys: 5

Key activation: After programming complete switch ignition ON-OFF 10 times and start engine.

Note! Write new eeprom back or learn the key by OBD using PIN from dump file.

Saab CIM
Saab CIM

Saab CIM removal
Saab CIM removal

Saab CIM 93LC66A location
Saab CIM 93LC66A location

Saab CIM Disassembling TIPS
Saab CIM Disassembling TIPS

Saab CIM Disassembling TIPS - 2 clips need to be directed inward (from the outside of the steering wheel) as shown in the picture below for successful airbag removal

Programmers

Autel

Immobilizer Programming EEPROM/Bench Programming

Abrites AVDI

Not supported

Xhorse

Immobilizer Programming EEPROM/Bench Programming Key via Dump

TDB1000

Not supported

Tech2

Immobilizer Programming

Orange5

EEPROM/Bench Programming

Tango

Key via Dump

Code Series

WT47: DA1-DA2892 (Cadillac, Saab) 7-7 Cuts
WT47: DB1-DB4500 (Saab) 8-8 Cuts

Media

Cutting (Part 1)

Using Xhorse automatic machine

Cutting (Part 2)

Using Xhorse automatic machine

Overview

Double locked
No
Opening direction (LHD)
Not specified
Decoder capability
Door LockBoot/Trunk

Overview

Original key glued
Not specified
Synchronizing
Yes

Media

Key Shell Replacement

Key Shell Replacement

Scroll To Top
  • Menu
Home
Catalog

Your Cart 0

Close

Shopping cart is empty!

Continue Shopping

Sidebar