Polestar Polestar 1 2021 Smart Key
Volvo Smart Key (RF430)
Overview
Key Type
Smart Key
Markets
EU, USA
Transponder
ID8A (RF430 / H CHIP)
Integrated
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
No
Skill Level
Specialist
Universal Keys
Xhorse V1 ID: 0558731
Not tested
Xhorse V2 ID: 0531 598
Not tested
Original Keys
OEM reference: 32398001 / 31652604 / 32256980
Direct Programming to another vehicle
Red key
Direct Programming to another vehicle
Volvo Tag Key
Direct Programming to another vehicle
Overview
Add key
OBDEeprom/Bench
All keys lost
OBDEeprom/Bench
System
CEM
Prepare dealer key
Not specified
Remote programming
Automatic
All keys erased automatically
No
Power supply
Mandatory
Additional cables required
No
Key Programming via OBD
General Instructions
- Key programming without removing the unit is only possible with a genuine Volvo VIDA or aftermarket tool with PIN-code.
- Keys can be programmed with Autel (and many other tools) after removing unit.
- Programming method is the same in all lost keys situation.
Vida setup
Battery support location
Mandatory when using Volvo Vida
Emergency Key Spot
Located in the cup holder with the corresponding key icon
Key Programming via EEPROM
Unit - CEM
Data location: MCU SPC5748G / SPC5747G / SC667320
Options for reading: 3
Note: Key writing is not possible via Eeprom (only reading).
CEM Location (v1)
Left side above the pedals
CEM Location (v2)
Left side above the pedals
Unit CEM
H5PLA
Unit PCB
MCU SPC5748G / SPC5747G / SC667320
Programmers
Volvo Vida
Recommended
Immobilizer Programming
Xhorse Key Tool Plus (KTP)
Immobilizer Programming
Autel
Immobilizer Programming
Yanhua ACDP
Immobilizer Programming
Lonsdor K518 PRO
Immobilizer Programming
TDB1000
Not supported
Smart Pro
Not supported
Code Series
A001-F099 (Cuts: 8-8, Card: 1420, ISN: 8246)
Media
Emergency Key
Door lock
Overview
Double locked
Yes
Opening direction (LHD)
Clockwise
Decoder capability
Door Lock
Decoding Tips
- HU101 lock has 8 spaces and 5 depths.
- Although the HU101 lock has 8 spaces and 5 depths, a Lishi with 10 cuts can be used.
- To prevent scratching the door handle, the Lishi cutout version is recommended.
- The same eight cuts on both sides of the key.
- To decode the lock read in the SAME direction as it was picked.
- Picking sequence for left hand drive is to fully set wafers 2, 3, 6, and 7 before wafers 1, 4, 5 and 8.
- Adjacent cuts must be no more than 2 depths difference.
- No keys contain a depth #1 in the last or the first positions.
Media
Decoding Instructions
Same rule applies for Polestar 1 and 2
General tutorial for HU101
Video by Bored Lock picker
Overview
Original key glued
Yes
Synchronizing
No
Media
