Lancia Musa 2011 Remote Key
Fiat Remote Key (ID48) 2006+
Overview
Key Type
Remote Key
Markets
EU, ASIA, SA, AUO
Transponder
ID48 (Megamos 48)
Separate
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
Yes
Skill Level
Specialist
Universal Keys
Xhorse 433MHz 3-button: ID 0543 895
Test passed
Xhorse 433MHz 2-button: ID 0551 069
Test passed
Original Keys
Fiat Code Card
Original Part Number: 71749162 / 71746336 (Fiat), 9170HC / 9170W6 (PSA)
Overview
Add key
OBD
All keys lost
OBD
Prepare dealer key
Yes
Remote programming
OBD
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Number of key slots
8
Key Programming via OBD
General Instructions
- Any key excluded from the programming session will be permanently removed from the system and cannot be re-added.
- If remote not working, need to reset BSI unit by taking the power cables of the unit for 5 seconds. If that does not help, program the same remote with other tool.
Key Programming via EEPROM
Unit 1 - Magneti Marelli (v1&v2)
Original transponder: Megamos ID48
Allowed transponder: Megamos ID48
Unit location: left side above the pedals
Data location:
- V1 - MC68HC912DG128
- V2 - MC9S12DG256
Heating temperature: 350°C
No. of keys: 8
Remote functions: Remote functions have to be matched via OBD.
Unit 2 - Magneti Marelli
Original transponder: Megamos ID48
Allowed transponder: Megamos ID48
Unit location: left side above the pedals
Data location: 95160
Reading: Out circuit
Adapters: Autel APB-129_V1, VVDI Eeprom adapter etc.
Heating temperature: 300°C
No. of keys: 8
Remote functions: Remote functions have to be matched via OBD.
Unit 3 -Delphi (v1&v2)
Original transponder: Megamos ID48
Allowed transponder: Megamos ID48
Unit location: left side above the pedals
Data location: 93C66
Reading: in circuit, out circuit
Adapters: Autel APB-129_V1, APA-103; VVDI Eeprom Clip etc.
Heating temperature: 300°C
No. of keys: 8
Remote functions: Remote functions have to be matched via OBD.
Unit 1 - Magenti Marelli (v1&v2)
Programmers
Abrites AVDI
Recommended
Immobilizer Programming
Remote Programming
Zed-Full
Recommended
Immobilizer Programming
Remote Programming
Smart Pro
Recommended
Immobilizer Programming
Remote Programming
Autel
Immobilizer Programming
Remote Programming
Xhorse
Immobilizer Programming
Remote Programming
TDB1000
Not supported
Code Series
DE1-DE11210 (Cuts: 8-8, Card: 929, ISN: 5147) (.........) ABCD (Cuts: 8-8, Card: 929, ISN: 6997)
Media
SIP22 key cutting with Xhorse
Overview
Double locked
No
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockBoot/Trunk
Decoding Tips
- Depths are A, B, C, D, ... "D" is the deepest cut.
- Depth markings on the tool are 1 to 4 ... 1 =A ... 2 = B ... 3 = C ... 4 = D.
- To decode the lock read in the OPPOSITE direction as it was picked.
- The ignition lock cannot be decoded.
- Some manufacturers provide a long key code number, only the last 4/5 digits are relevant.
Media
SIP22 Lishi Picking & Decoding
Video by Bored Lock picker
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Key has a separate immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
- Key shell is secured with a screw under the emblem.
- The immobilizer chip cannot be reused, but the remote can be programmed directly to another vehicle.