Lancia Voyager 2012 Slot Key
Fobik Key
Overview
Key Type
Slot Key
Markets
EU
Transponder
ID46 (PCF7941 / HITAG 2)
Integrated
Frequency
433 MHz
Battery
CR2032
Transponder Cloning
Yes
Skill Level
Beginner
Original Keys
6Buttons w/ Liftgate, 2 Sliding Doors
Can Be Unlocked
Overview
Add key
OBD
All keys lost
OBD
System
WIN
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Not specified
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Number of key slots
8
Key Programming via OBD
General Instructions
- The car has memory slots for eight keys.
- With keyless Go: First perform FOBIK programming then perform MATCH KEYLESS GO procedure under PROGRAM REMOTES. This is for the removable push button option to work.
- After 3 incorrect PIN attempts the immobilizer locks; fix by turning ignition OFF, switching hazard lights ON, and programming keys with the correct PIN.
Key Programming via EEPROM
Unit 1 - WIN Module
Unit location: EIS (electronic ignition switch)
Data location: ST93C86
Reading: in circuit, out circuit
Adapters: Autel APB-129_V1, APA-103; VVDI Eeprom Clip etc.
Heating temperature: 300°C
-------------------------------------------------------------------
Unit 2 - WIN Module
Unit location: EIS (electronic ignition switch)
Data location: uPD70F3373, uPD70F3626, uPD70F3629
Reading: In circuit
Cable: VVDI MCU
Heating temperature: 350°C
Unit 1 - WIN Module
Unit 2 - WIN Module
Programmers
Autel
Immobilizer Programming
Abrites AVDI
Immobilizer Programming
Xhorse
Immobilizer Programming
TDB1000
Immobilizer Programming
Smart Pro
Immobilizer Programming
Lonsdor K518 PRO
Immobilizer Programming
Code Series
L1-L3580 (Chrysler, Dodge, Eagle, Jeep, Plymouth) M1-M2618 (Chrysler, Dodge, Eagle, Jeep, Maserati, Mitsubishi, Plymouth, RAM, Sterling, Volkswagen)
Media
Emergency Key
Emergency blade cutting tutorial
Using XHORSE Condor XC-MINI PLUS II automatic machine
Overview
Double locked
No
Opening direction (LHD)
Not specified
Decoder capability
Door Lock
Decoding Tips
- All wafers are stamped with actual depth numbers.
- Position 1 is not used in the door lock.
- To decode the lock, read in the SAME direction as it was picked.
- Lishi 2-in-1 is s designed for code series M1-M2168 and VN0-VN1999 as it has 4 depths.
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Keys has an integrated immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
Media
Shell and battery change
Circuitboard
IYZ-C01C PCB (turn-the-key ignition)
IYZ-C01C PCB (smart key)
