Saab 9-3 2002 Remote Key
Saab Remote Key
Overview
Key Type
Remote Key
Markets
EU, USA
Transponder
ID14
Integrated
Frequency
433 MHz
Battery
CR1632
Transponder Cloning
Yes
Skill Level
Specialist
Original Keys
Original key number 5265327 (remote part)
Direct Programming to another vehicle
Overview
Add key
OBD
All keys lost
Eeprom/Bench
System
Twice
Prepare dealer key
No
Remote programming
Automatic
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Number of key slots
4
Key Programming via OBD
General Instructions
- PIN-code is not required for programming the key.
- All keys must be present during programming.
- Copying the key requires a more powerful TK5551 chip, which has been discontinued. T5 and other general chips are too weak to work properly.
Key programming
Using Autel IM608
Key Programming via EEPROM
Unit - Saab Twice
Transponder to use: T5, TK5551
Data location: MC68HC705X32 (secured)
Data size: 256 bytes
Heating temperature: 350°C
Saab Twice Location
Video instruction
Immobiliser Unit
Saab Twice Module
Unit PCB
Side 1
Unit PCB
Side 2
Programmers
Autel
Recommended
Immobilizer Programming
Xhorse
Recommended
Immobilizer Programming
Key via Dump
Orange5
Recommended
EEPROM/Bench Programming
Tech2
Immobilizer Programming
Smart Pro
Immobilizer Programming
Abrites AVDI
Not supported
TDB1000
Not supported
Code Series
BC1-BC2865 (Cuts: 10-10, Card: 814, ISN: 2417) YM30
Media
Cutting the blade
Using Xhorse automatic machine
Overview
Double locked
No
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockIgnitionBoot/Trunk
Decoding Tips
- YM30: Ignition has 10 cuts as doors and boot has 8 cuts.
- To decode the lock read in the SAME direction as it was picked.
Overview
Original key glued
No
Synchronizing
Not specified