Saturn Vue 2002 Remote

GM Remote LHJ011

USA

Overview

Key Type
Remote
Markets
USA
Frequency
315 MHz
Battery
CR2032
Skill Level
Beginner

Universal Keys

Xhorse ID 0557 976

Xhorse ID 0557 976

Test passed
KeyDiy ID R00218 (online)

KeyDiy ID R00218 (online)

Test passed

Original Keys

LHJ011 3Buttons

LHJ011 3Buttons

Direct Programming to another vehicle

Overview

Add key
OBD
All keys lost
OBD
Prepare dealer key
Not specified
Remote programming
Manual
All keys erased automatically
Yes
Power supply
Recommended (if under 11.5V)
Additional cables required
Not specified
Number of key slots
4

Key Programming via OBD

General Instructions

  • PIN code is not required for remote programming.

Remote Manual Programming

Some LHJ011 remotes are programmed via OBD

Manual Procedure

CLOSE all doors.
INSERT key into ignition.
Hold down the power UNLOCK button on the driver's door panel until instructed to release in step 9.
Perform steps 5 through 8 quickly.
Turn the ignition to the ON position (do not start the engine.)
Turn the ignition to the OFF position.
Turn the ignition to the ON position (do not start the engine.)
Turn the ignition to the OFF position.
Release the power UNLOCK button on the door panel.NOTE : The door locks should LOCK and UNLOCK.
HOLD down the LOCK and UNLOCK buttons on the remote control key until the doors LOCK and UNLOCK. NOTE : This may take up to 30 seconds.
Repeat step 10 immediately for each additional remotes and all existing remote controls.
Turn the ignition to the ON position to exit the programming mode.
Test all remote transmitters for operation.

Programming instructions for Buick, Cadillac, Chevy, GMC and Hummer up to 2007
Programming instructions for Buick, Cadillac, Chevy, GMC and Hummer up to 2007

Video by carandtruckremotes

Programmers

Autel

Remote Programming

Xhorse

Remote Programming

Smart Pro

Remote Programming

Overview

Double locked
Not specified
Opening direction (LHD)
Not specified
Decoder capability
Not specified

Overview

Original key glued
No
Synchronizing
No

Repair Instructions

  • Separate remotes do not house immobilizer chips.
  • There is no need to synchronize or reprogram the key after replacing the battery.

Media

Shell and battery change

Shell and battery change

Circuitboard

LHJ011 PCB

LHJ011 PCB
Scroll To Top
  • Menu
Home
Catalog

Your Cart 0

Close

Shopping cart is empty!

Continue Shopping

Sidebar