Saturn Vue 2004 Remote
GM Remote LHJ011
Overview
Universal Keys
Xhorse ID 0557 976
KeyDiy ID R00218 (online)
Original Keys
LHJ011 3Buttons
Overview
Key Programming via OBD
General Instructions
- PIN code is not required for remote programming.
Remote Manual Programming
Some LHJ011 remotes are programmed via OBD
Manual Procedure
CLOSE all doors.
INSERT key into ignition.
Hold down the power UNLOCK button on the driver's door panel until instructed to release in step 9.
Perform steps 5 through 8 quickly.
Turn the ignition to the ON position (do not start the engine.)
Turn the ignition to the OFF position.
Turn the ignition to the ON position (do not start the engine.)
Turn the ignition to the OFF position.
Release the power UNLOCK button on the door panel.NOTE : The door locks should LOCK and UNLOCK.
HOLD down the LOCK and UNLOCK buttons on the remote control key until the doors LOCK and UNLOCK. NOTE : This may take up to 30 seconds.
Repeat step 10 immediately for each additional remotes and all existing remote controls.
Turn the ignition to the ON position to exit the programming mode.
Test all remote transmitters for operation.
Programming instructions for Buick, Cadillac, Chevy, GMC and Hummer up to 2007
Video by carandtruckremotes
Programmers
Autel
Xhorse
Smart Pro
Overview
Overview
Repair Instructions
- Separate remotes do not house immobilizer chips.
- There is no need to synchronize or reprogram the key after replacing the battery.
Media
Shell and battery change
Circuitboard
LHJ011 PCB