Scion FR-S 2015 Remote Key
Toyota Remote Key (ID72-G) 12BEL/12BDM
Overview
Key Type
Remote Key
Markets
USA
Transponder
ID72 (Texas 72 G-Chip 80Bit)
Separate
Frequency
315 MHz
Battery
CR2016
Transponder Cloning
Yes
Skill Level
Skilled
Universal Keys
HYQ12BEL: Xhorse ID 0500 126
Test passed
HYQ12BEL: KeyDiy ID R00480
Test passed
Original Keys
HYQ12BEL 3Buttons 315MHz "G" 89070-52F60: Toyota Prius C 2012-2015,
Direct Programming to another vehicle
HYQ12BEL 4Buttons 315MHz "G" SU003-05282, 89070-06420: Toyota Camry 202-2017, 86 2017-2019, Scion FR-S 2014-2016
Direct Programming to another vehicle
Overview
Add key
OBD
All keys lost
OBD
System
Toyota G
Prepare dealer key
No
Remote programming
OBD
All keys erased automatically
Not specified
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Key Programming via OBD
General Instructions
- Remote functions are programmed separately from immobilizer.
- All lost key situation can be done via OBD.
How to Identify Toyota G System
In some Toyota models, even within the same model year, two different immobilizer systems may be used. In original Toyota keys, the letter “G” refers to the Toyota G-chip system.
Key Programming via EEPROM
Programmers
Autel
Immobilizer Programming
Remote Programming
Smart Pro
Immobilizer Programming
Remote Programming
Xhorse
Immobilizer Programming
Remote Programming
Abrites AVDI
Immobilizer Programming
Remote Programming
TDB1000
Immobilizer Programming
Remote Programming
Code Series
10001-15000 (Toyota, Hino) 8-8 Cuts 1-5000 (Chevrolet, GM, Toyota) 8-8 Cuts 50000-69999 (Toyota, Pontiac, Scion) 10-10 Cuts
Overview
Double locked
No
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockIgnitionBoot/Trunk
Decoding Tips
- Lishi TOY43 is for 8-8 cut keys
- Lishi TOY43AT is for 10-10 cut keys
- There is separate Lishi tool for ignition and door locks.
- To decode the lock read in the SAME direction as it was picked.
Keys with 10 cuts:
- There are two versions: ISN 444 → 4 is deepest cut, ISN 7625 → 1 is deepest cut.
- Adjacent cuts WITHIN the pairs must be no more than one depth apart.
- Adjacent cuts BETWEEN the pairs must be no more than two depths apart.
- No more than three consecutive cuts of the same depth.
- Number stamped on some wafers are opposite to its corresponding cut depth.
Overview
Original key glued
No
Synchronizing
No
Repair Instructions
- Key has separate immobilizer chip.
- There is no need to synchronize or reprogram the key after replacing the battery.
- Key shell is secured with a srew.