Infiniti I30/I35 2003 Remote

Requirements:

• All remotes (including working ones)
• Doors unlocked
• Key removed from ignition

Step-by-Step:

1. Close and lock all doors (using the driver’s door lock switch).
2. Insert the key into the ignition and remove it 6 times within 10 seconds.
   1. Do it rapidly — ignition position does not matter.
   2. The hazard lights will flash twice to indicate you’ve entered programming mode.
   3. If they don't flash, restart from Step 1.
3. Insert the key again and turn it to the ACC position (not ON).
4. Press any button on the first remote (within 5 seconds).
   1. Hazard lights should flash once to confirm.
5. To program additional remotes:
   1. Press a button on each remote within 5 seconds of the previous one.
   2. Max: typically up to 4 remotes.
6. Turn ignition OFF and remove the key.
7. Open the driver’s door to exit programming mode.

1. Do it rapidly — ignition position does not matter.
2. The hazard lights will flash twice to indicate you’ve entered programming mode.
3. If they don't flash, restart from Step 1.

1. Hazard lights should flash once to confirm.

1. Press a button on each remote within 5 seconds of the previous one.
2. Max: typically up to 4 remotes.