Isuzu D-Max 2011 Transponder Key
Transponder key (TOY43R+ID48)
Overview
Key Type
Transponder Key
Markets
EU, ASIA
Transponder
ID48 (Megamos 48)
Separate
Transponder Cloning
Yes
Overview
Add key
OBD
All keys lost
Eeprom/Bench
Prepare dealer key
Not specified
All keys erased automatically
Not specified
Power supply
Recommended (if under 11.5V)
Additional cables required
No
Programmers
Autel
Immobilizer Programming
Abrites AVDI
Immobilizer Programming
Xhorse
Immobilizer Programming
TDB1000
Not supported
Code Series
0000-5928 (Chevrolet, Holden, Isuzu) 10-10 Cuts 70000-75928 (Chevrolet, Holden, Isuzu) 10-10 Cuts 022000-022999 (Isuzu) 10-10 Cuts
Overview
Double locked
No
Opening direction (LHD)
Counter-clockwise
Decoder capability
Door LockIgnitionBoot/Trunk
Decoding Tips
- There is separate Lishi tool for ignition and door locks.
- To decode the lock read in the SAME direction as it was picked.
- Adjacent cuts WITHIN the pairs must be no more than one depth apart.
- Adjacent cuts BETWEEN the pairs must be no more than two depths apart.
- No more than three consecutive cuts of the same depth.
- Number stamped on some wafers are opposite to its corresponding cut depth.0000-5928 (Chevrolet, Holden, Isuzu) 10-10 Cuts
Overview
Original key glued
Yes
Synchronizing
No
