Jaguar XJ 2012 Smart Key

Key Programming via OBD

For the earlier models up to 2015 - perform key learning directly.For the models 2015 and up - use "Key Cloning" function for locked modules.

For the earlier models up to 2015 - perform key learning directly.

For the models 2015 and up - use "Key Cloning" function for locked modules.

Key Programming via EEPROM

For AKL cases "Key Cloning" function can be used via OBD, but some modules might be with updated security and have to perform Eeprom/Bench method.If after programming the keys don't work - disconnect the battery for 2-3 minutes and test.

For AKL cases "Key Cloning" function can be used via OBD, but some modules might be with updated security and have to perform Eeprom/Bench method.

If after programming the keys don't work - disconnect the battery for 2-3 minutes and test.

Solder free adapterProduct code: XDNP16

Key programming (Bench method)

Solder free adapter

Product code: XDNP16

Key Programming via OBD

ADD Key and AKL by OBDII “Key Learning Special”:KEYS: only Abrites TA54/TA56The “Key Learning Special” special function is dedicated to all 2012-2021 JLR vehicles equipped with a KVM and allows you to program keys, even if the KVM is locked.The function requires a PROTAG programmer to be connected to the PC as well as an AVDI interface and a TA54/TA56/TA57(2018+ vehicles) Abrites key for JLR. TA54/TA56/TA57 is the only key supported by the “Key Learning Special” function.IMPORTANT: If the vehicle is ARMED you will probably need to connect to the internal CAN-H and CAN-L of the vehicle using the either the CB012 Abrites cable set or a Distribution box(the software will let you know if a direct connection is required). The internal CAN-H and CAN-L can be found under the front seats or inside all 4 doors.Refer to the user manual if required:https://abrites.com/media/user_manuals/html/abrites-diagnostics-for-jlr-user-manual/index.html?v=1699632667

ADD Key and AKL by OBDII “Key Learning Special”:

KEYS: only Abrites TA54/TA56

The “Key Learning Special” special function is dedicated to all 2012-2021 JLR vehicles equipped with a KVM and allows you to program keys, even if the KVM is locked.

The function requires a PROTAG programmer to be connected to the PC as well as an AVDI interface and a TA54/TA56/TA57(2018+ vehicles) Abrites key for JLR. TA54/TA56/TA57 is the only key supported by the “Key Learning Special” function.

IMPORTANT: If the vehicle is ARMED you will probably need to connect to the internal CAN-H and CAN-L of the vehicle using the either the CB012 Abrites cable set or a Distribution box(the software will let you know if a direct connection is required). The internal CAN-H and CAN-L can be found under the front seats or inside all 4 doors.

Refer to the user manual if required:

https://abrites.com/media/user_manuals/html/abrites-diagnostics-for-jlr-user-manual/index.html?v=1699632667

Alarm Active adapterProduct code: CB012

Key programming AKL

Alarm Active adapter

Product code: CB012

Key Programming via EEPROM

Abrites does not support bench reading (soldering or solder-free adapters) for this particular models, since programming can be performed via OBD in most cases. For vehicles with updated security level the programmer may require deleting all existing keys from the vehicle. In this case 2 new keys must be programmed.

Abrites does not support bench reading (soldering or solder-free adapters) for this particular models, since programming can be performed via OBD in most cases.

For vehicles with updated security level the programmer may require deleting all existing keys from the vehicle. In this case 2 new keys must be programmed.

Key Programming via OBD

For the earlier models up to 2015 - perform key learning directly.For the models 2015 and up - use "Key Cloning" function for locked modules.

For the earlier models up to 2015 - perform key learning directly.

For the models 2015 and up - use "Key Cloning" function for locked modules.

Key programming via OBD ("Cloning key" method)

Autel key generating

Key Programming via EEPROM

When operating on the bench, read the "Chip Status" first by connecting with unsecured method, if it is unlocked choose "Read data (unsecured)", if locked choose "Read data (secured) method, which requires desoldering components from the circuitboard of the unit.For AKL cases "Key Cloning" function can be used via OBD, but some modules might be with updated security and have to perform Eeprom/Bench method.If after programming the keys don't work - disconnect the battery for 2-3 minutes and test.

When operating on the bench, read the "Chip Status" first by connecting with unsecured method, if it is unlocked choose "Read data (unsecured)", if locked choose "Read data (secured) method, which requires desoldering components from the circuitboard of the unit.

For AKL cases "Key Cloning" function can be used via OBD, but some modules might be with updated security and have to perform Eeprom/Bench method.

If after programming the keys don't work - disconnect the battery for 2-3 minutes and test.

TipsNote! Read the "Chip Status" first by connecting with unsecured method, if it is unlocked - choose "Read data (unsecured)". If chip status is "locked" - choose "Read data (secured).

All keys Lost - Bench programming

Tips

Note! Read the "Chip Status" first by connecting with unsecured method, if it is unlocked - choose "Read data (unsecured)". If chip status is "locked" - choose "Read data (secured).

Key Programming via OBD

Supports add key and all keys lost for the USA and EU market. Can bypass the alarm if needed.

Key duplication (without car)

Key Programming via OBD

Key programming

Key Programming via OBD

Key programming (OBD "Cloning key" method)

Key Programming via EEPROM

Key programming (Bench method)

All keys lost (Bench method)

Key Programming via OBD

Add key OBDSupports as well "Key cloning" function for newer models 2015-2019.

Add key OBD

Supports as well "Key cloning" function for newer models 2015-2019.

Key Programming via OBD

XJ - Key programming

Immobilizer Programming

Partly supported. Have to use OEM key. XJ supported

Key Programming via OBD

Key programming is partly supported, vehicles mainly from 2015 and up are not covered.

Immobilizer Programming

Only supports newer looking key type from 2018 and up.