Scion xB 2006 Remote
Toyota Remote HYQ12BAN
Overview
Key Type
Remote
Markets
USA
Frequency
314 MHz
Battery
CR2016
Skill Level
Beginner
Universal Keys
HYQ12BAN: Xhorse ID 0508 062
Test passed
Original Keys
HYQ12BAN 315MHz 3Buttons w/ Panic: Scion xB 04-07, Celica 00-05, FJ Cruiser 07-08, Highlander 01-07, Prius 01-03, Rav4 01-05, Tacoma 02-04, Tundra 03-06
Direct Programming to another vehicle
HYQ12BAN 315MHz 4Buttons w/ Panic: Toyota 4Runner 03-09, Sequoia 01-07
Direct Programming to another vehicle
Overview
Add key
Not specified
All keys lost
Not specified
Prepare dealer key
Not specified
Remote programming
Manual
All keys erased automatically
No
Power supply
Not specified
Additional cables required
Not specified
Remote Manual Programming
NOTE Make sure the power is OFF and the driver's door is open
NOTE This instruction must be completed within two minutes
- Insert and remove key from ignition TWICE.
- CLOSE and OPEN the driver's side door TWICE - leaving the door in OPEN position.
- Insert and remove key from ignition ONCE.
- CLOSE and OPEN the driver's side door TWICE - leaving the door in OPEN position.
- Insert the key and close driver door.
- Turn ignition ON and OFF. Do not start the vehicle.
- Remove the key from ignition. Door locks will cycle ONCE to indicate programming mode is active.
- PRESS and release both LOCK and UNLOCK buttons on the remote control for 2 seconds.
- PRESS and release the LOCK button on the remote control for one second. Door locks will cycle ONCE to indigate successful programming. (NOTE: if the locks cycle TWICE remote control might be incorrect for the vehicle).
- Repeat steps 8 and 9 for any additional remotes.
- Turn ignition ON and OFF to exit programming mode.
Toyota Manual Remote Programming
Overview
Double locked
Not specified
Opening direction (LHD)
Not specified
Decoder capability
Not specified
Overview
Original key glued
Not specified
Synchronizing
Not specified